{"id":331,"date":"2018-04-13T15:12:30","date_gmt":"2018-04-13T06:12:30","guid":{"rendered":"http:\/\/wptest2.mir9.co.kr\/?page_id=331"},"modified":"2018-05-07T10:22:21","modified_gmt":"2018-05-07T01:22:21","slug":"ms-100","status":"publish","type":"page","link":"https:\/\/www.cychem.co.kr\/en\/product\/rust-remover-corrosion-inhibitor\/ms-100\/","title":{"rendered":"MS-100"},"content":{"rendered":"

MS-100<\/p>\n<\/div><\/section>\n

Carbon Cleaner<\/p>\n<\/div><\/section>\n

MS-100 <\/strong>effectively removes rust faster than other inorganic acid such as HCl, H2<\/sub>SO4<\/sub>, HNO3 <\/sub>without damage to metal. MS-100<\/strong> provides anticorrosive effect on the surface after cleaning, and the cleaned surface does not affect the post processes such as painting, welding, plating, etc.<\/p>\n<\/div><\/section>\n

[Features]<\/p>\n<\/div><\/section>\n

\u2022 Completely dissolves rust, carbon deposits, and oxide on metal without damaging the plating layer or the metal surface even in room temp.
\n\u2022 Removes rust more effectively compared to existing inorganic acid (hydrochloric acid, nitric acid, sulfuric acid)
\n\u2022 Provides anticorrosive effect for 1 month the longest after removing the rust
\n\u2022 Cleaned surface does not affect the post processes such as painting, welding, plating, etc.
\n\u2022 May apply to various metal<\/p>\n<\/div><\/section>\n

[ Properties and method ]<\/p>\n<\/div><\/section>\n

\n\n\n\n\n\n
Appearance<\/th>\n\u00a0Light yellow transparent liquid<\/td>\nConcentration<\/th>\nOriginal\/undiluted<\/td>\n<\/tr>\n
Odor<\/th>\nUnique odor<\/td>\nTemp.<\/th>\nRoom temp. ~ 50 \u2103<\/td>\n<\/tr>\n
pH(10%)<\/th>\n1.31 \u00b1 0.5<\/td>\nMethod<\/th>\nDipping, coating, spray<\/td>\n<\/tr>\n
S\/G (g\/ml)<\/th>\n1.16 \u00b1 0.02<\/td>\nPacking<\/th>\n20L (pail) \/ 200L (drum)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div><\/section>\n

\u203b Application method<\/p>\n<\/div><\/section>\n

    \n
  • 1. Excessive oil or grease shall be removed before rust removal process since they prevent MS-100<\/strong> from penetrating to the surface. (Cleaner: Use SeacleanC<\/strong>)<\/li>\n
  • 2. Choose proper application method based on the condition of the target object. (dipping, coating, spray)\n
      \n
    • – Dipping : Dilute MS-100<\/strong> in proper concentration. Process time may take 15~30 min. Additional rinsing won\u2019t be necessary before drying. Process shall be held in containers made of plastic, rubber, or stainless.<\/li>\n
    • – Coating : Applicable when the target object is small or partial. Coat the surface with diluted solution using soft cloth or brush. After 10~20min., wipe out and dry completely.<\/li>\n
    • – Spray: Spray when dipping or coating may not be an option. Spray at low pressure. Sprayed vapor will subside since specific gravity of the solution is quite heavy.
      \nIn process, spray starting from the top to the bottom. Spray carefully in joints, welded sites, bolts, and cracks. MS-100<\/strong> has excellent penetration force, therefore simple spraying will allow deep penetration to the tiniest cracks. If necessary, rinse the surface by spraying the water and dry after 20~30 min. later.<\/li>\n<\/ul>\n<\/li>\n
    • 3. Since MS-100<\/strong> is not at risk of starting fire, the solution can be diluted at any concentration. Application temperature shall be in the range of 20~50\u2103 depends on the condition of the target object, but is also okay to be increased up to 60\u2103 for rapid process.<\/li>\n
    • 4. Paint can be coated right after applying MS-100<\/strong>.<\/li>\n
    • 5. Wastewater treatment : Adjust the pH up to 7 using calcium oxide, and settle the solution by adding organic coagulant.<\/li>\n<\/ul>\n<\/div><\/section>\n

      [ Application ]<\/p>\n<\/div><\/section>\n

      \u2022 Oxide layer removal on mold, precision instrument, precision parts, industrial machinery, tools, bearing, etc.
      \n\u2022 Maintenance of large storage tank, piping, etc.
      \n\u2022 Metal plating and rust removal of automobile, heavy equipment, shipbuilding, etc.<\/p>\n<\/div><\/section>\n

      \u203b Removal of oxide deposit on intake and exhaust valve of marine and heavy equipment engine<\/p>\n<\/div><\/section>\n

      \"\"<\/p>\n<\/div><\/section>\n

      \u203b Removal of oxide layer and contaminants on Al tube<\/p>\n<\/div><\/section>\n

      \"\"<\/p>\n<\/div><\/section>\n

      \u203b Removal of oxidized layer on SCNF steel<\/p>\n<\/div><\/section>\n

      \"\"<\/p>\n<\/div><\/section><\/div>","protected":false},"excerpt":{"rendered":"","protected":false},"author":2,"featured_media":0,"parent":220,"menu_order":1,"comment_status":"closed","ping_status":"closed","template":"template-page.php","meta":[],"_links":{"self":[{"href":"https:\/\/www.cychem.co.kr\/en\/wp-json\/wp\/v2\/pages\/331"}],"collection":[{"href":"https:\/\/www.cychem.co.kr\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.cychem.co.kr\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.cychem.co.kr\/en\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.cychem.co.kr\/en\/wp-json\/wp\/v2\/comments?post=331"}],"version-history":[{"count":2,"href":"https:\/\/www.cychem.co.kr\/en\/wp-json\/wp\/v2\/pages\/331\/revisions"}],"predecessor-version":[{"id":937,"href":"https:\/\/www.cychem.co.kr\/en\/wp-json\/wp\/v2\/pages\/331\/revisions\/937"}],"up":[{"embeddable":true,"href":"https:\/\/www.cychem.co.kr\/en\/wp-json\/wp\/v2\/pages\/220"}],"wp:attachment":[{"href":"https:\/\/www.cychem.co.kr\/en\/wp-json\/wp\/v2\/media?parent=331"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}